Tenerife ceiling fan for ventilation and destratification, with remote control, thermostat and Wi-Fi,Tenerife_DC1_P6Sw132

KlassFan
Tenerife_DC1_P6Sw132

Tenerife is a series of modular ceiling fans that provide ventilation in summer and heat recovery in winter.
Tenerife is a versatile product that is characterized by both its modern look and its functionality.

All Tenerife Series ceiling fans have a DC motor made from 100% copper and fitted with self-lubricating ball bearings - these features guarantee very quiet and smooth running.

The motor:
  Advantages:

  -Precise speed control: Unlike AC ceiling fans, DC motors allow more precise speed control due to the greater number of stages. This ceiling fan has 6 speeds.

- Low power consumption: DC motors offer the same performance as AC motors, but with half the energy consumption!

- Hyper Silence: this designation stands for an extra quiet run. Hyper Silence ceiling fans are virtually inaudible up to speed 3 and at higher speeds only the movement of the air may be heard.

Tenerife comes with two ceiling poles of 12.5 cm and 25 cm. Optionally we offer extension poles of 60, 120 and even 180 cm!

Tenerife can easily be connected to an AC power grid as there is a built-in transformer in the motor.

The blades:
All blades sets for the Tenerife series consist of 3 blades, which are made of either robust ABS or wood. Depending on your requirements, either 2 or 3 blades can be mounted on the motor.
The current combination includes a wing set type:
P6 - 132
For rooms from 25 to 40 m² in summer and 60-90 m² in winter
Size - 132 cm, material - wood, power - 3850 - 12990 m³/h, RPM 70-210, noise level - 28 -45 dB, 3 - 21W
The remote control:

All Tenerife ceiling fans come with a remote control that gives access to all available functions - speed selection, light on/off and dimming, timer, memory, thermostat, Wi-Fi.
The thermostat allows the automatic selection of the optimal level according to the room temperature.
When the thermostat is activated, the ceiling fan reacts as follows:
  0 - 19 ° C = level 1
19° - 21°C = level 2
22° - 23°C = level 3
24 - 26° C = level 4
26 - 28° C = level 5
From 28° C = level 6
The thermostat can be deactivated from the remote control.


What is heat recirculation/destratification?

Some ceiling fans ensure that the air in the room is mixed and that the room temperature is balanced, as well as making optimal use of the heating energy used.
These ceiling fans are particularly useful for high ceilings of 3m or more.

Since the heated air has a lower specific weight than the cold ambient air, it rises to the ceiling area and collects there. It is always colder on the ground, where people live and work, than on the ceiling. The higher the ceiling, the greater the heat loss. In rooms 6 m high, the temperature difference between floor and ceiling can reach 12 degrees!

The purpose of the ceiling fans for heat distribution is to bring the warm air that has accumulated on the ceiling back to the floor where it is actually needed. This way you can even out the temperature of the room and save up to 30% on your electricity bill!

Technical characteristics:

For rooms: in winter operation - 60-90 m²/ in summer operation 25-40 m²
Light: without
Controls: Radio frequency remote control with timer, memory, reverse, thermostat, Wi-Fi
Destratification mode: Yes, via remote control
Number of levels: 6
Design: blades wood, motor, DC, black
Installation on inclined ceiling: yes, up to 15º, ceiling rods of 12.5 and 25 cm included
Memory function: yes
Timer: 1 to 8 hours
Diameter: 132 cm
Weight: 7kg
Standards: THUV-GS-CE-RHOS